Beam Analyzer Measurement Device | Dealer
The Beam Analyzer is a compact measurement device that is designed to handle continuous high power laser beams, measuring the divergence and RGB alignment of the laser source with very high accuracy. The Beam Analyzer also includes a simple software that allows you to preform all the different measurements quickly and easily.
This device analyzes a laser beam to enable to measure the main specifications that qualify the quality of the beam. The angular measurement method used by the beam analyzer gives the advantage to not depend on the input beam diameter or on the distance between the measuring device and the laser source. The resolution on the measure is 0.01mrad.
| Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Optical power [Popt] | 0.1 | - | 100 | W |
| Power measurement accuracy | - | 1 | - | % |
| Resolution on divergence [RΦ] | - | 0.01 | - | mrad |
| Divergence measured (FWHM) [Φ] | 0.1 | - | 10 | mrad |
| Input beam diameter [D] | - | - | 22 | mm |
| Wavelength detected [λ] | 400 | - | 1000 | nm |
(*) The sensor of the LBA-C must remain below 75°C while operating. It may be need to dissipate heat from the case with a fan when using the device with high power beams for a long period.
(**) A correct alignment should be done before setting the laser projector to maximum power. The user must follow the alignment procedure described in the User Manual to prevent damage to the system.